[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [APD] CO2 Diffusion Experiment #1 Results
Jerry Baker wrote:
> Trial #3 was run twice to make sure. First result was 129 bubbles,
> second result was 130 bubbles. I will leave the setup going until
> tomorrow to see if the solution becomes saturated overnight, and give it
> a go.
Well, Murphy visited my home in the wee hours of the night. My pH meter
electrode is not working correctly, so I had to use the test kit. The pH
is off of the chart on the test kit (below 6.0). My tap water's KH is 9
(160ppm), so all I know right at this moment is that the CO2 is above
260 mg/L. Regardless, it took 122 bubbles to fill 5 mL in the test tube.
Aquatic-Plants mailing list
Aquatic-Plants at actwin_com