[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [APD] CO2 Reactor Questions
Wouldn't it be easier to just put your spray bar below the surface of
the water? Even if you get a reactor and leave the spray bar above the
water surface, you will still be losing C02 thanks to the surface
agitation.
Maybe I misunderstood your problem though.
Jason
-----Original Message-----
From: aquatic-plants-bounces at actwin_com
[mailto:aquatic-plants-bounces at actwin_com] On Behalf Of rockel
Sent: Wednesday, December 10, 2003 6:07 PM
To: aquatic-plants at actwin_com
Subject: [APD] CO2 Reactor Questions
I am running DIY CO2 through the intake on my Ehiem 2215 canister on
my 35 gal. tank. I am losing a lot of CO2 through the spray bar and
would like to build a reactor. Through the archives I found this site
http://www.aquaticscape.com /articles/co2reactor.htm showing the
construction of a reactor.
Some questions.
Can the reactor be used with DIY CO2?
I assume by "inline", you cut out a piece of the plastic tubing approx.
the length of the reactor between the intake and the canister and
install the reactor where the piece was cut out?
Do you need the airline connector or can you still have the CO2 go into
the intake of the canister in the tank? By having the airline on the
reactor are you just taking a tube out of the tank for appearances or is
there another purpose for the location on the reactor.
Thanks for your comments.
Dale
_______________________________________________
Aquatic-Plants mailing list
Aquatic-Plants at actwin_com
http://www.actwin.com/mailman/listinfo.cgi/aquatic-plants
_______________________________________________
Aquatic-Plants mailing list
Aquatic-Plants at actwin_com
http://www.actwin.com/mailman/listinfo.cgi/aquatic-plants