Re: Pump for python

["Jim Miller" <jim at jtmiller_com>]

How about having the waste end terminate at a shower drain which would be
lower. The lower output will result in a faster flow. Once the flow is
started by the venturi you could then shut off the water. You can refit your
shower head with a tee fitting to provide the starter flow. That is what I
was planning to do.

jtm

 From: Brown_D at pcfnotes1_wustl.edu

[...]

My current python setup includes an extender to reach a distant tank from
the tap and with the extender, I have to run the tap very wide open to get
good flow, otherwise flow is so slow I sometimes revert to a bucket.