[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Killietalk] Whats best to use for a killi recirculating / sump water filtration system?
I use the drip irrigation flag emitters for my system. That way, all
the tanks get the same flow for the same size rated emitter.
For the drains, use a gasket punch to cut plugs out of articulated
foam. Can do a large number in 15 minutes. I put these into the
elbow fitting used as a drain. In tanks without peat, they last for
many months to many years (I have some that are still in use at 10
years). I do not bother to clean them since they are so easy to make
but one could if they so chose to do so.
>Hi Kiil Fans,
>Anyone try using the irigation hose and fitting for a recirculating
>/ sump water filter system? I have some nice bulkhead fittings for
>the shoue box drains. Now need a reliable easy method of
>controlling water flow into the tanks. I was looking at the lawn
>irigation section at Lowes and Home Depot. Fittings are mostly
>If would be interesting to hear of the experiences that other senior
>killi fans have had with the JEHMCO, and other manufacturers.
>Join the AKA at http://www.aka.org/aka/modules/content/index.php?id=9.
>Archives are at http://fins.actwin.com/killietalk/
>Modify your subscription at
Join the AKA at http://www.aka.org/aka/modules/content/index.php?id=9.
Archives are at http://fins.actwin.com/killietalk/
Modify your subscription at http://www.actwin.com/mailman/listinfo.cgi/killietalk