Re: [Killietalk] wood stand screws - was Re: Kens pipedreaming: theUltimate fishroom?(extended dance version)

["George & Melanie Caruso" <caraway1 at centurytel_net>]

I used 2x4's in my racks and find it is very sturdy . Will hold any tank 
well.
George
----- Original Message ----- 
From: "John Wubbolt" <BigJohnW at webtv_net>
To: <ken_combs at sbcglobal.net>; "killifish discussion list" 
<killietalk at aka_org>
Sent: Tuesday, May 22, 2007 1:23 AM
Subject: Re: [Killietalk] wood stand screws - was Re: Kens pipedreaming: 
theUltimate fishroom?(extended dance version)


> pre-drill your holes.....no splitting then.   i would also recommend
> using something bigger then 1x2 material..    real 2x4 are actually
> planed down to 1 1/2 x 3 1/2 size.    much stronger and safer, less
> likelyhood of an accidental breakage
>
> but just my opinion and experience building racks for my tanks..
>
> good luck!
>
> John
>
> Join the AKA at http://www.aka.org/aka/modules/content/index.php?id=9.
> Archives are at http://fins.actwin.com/killietalk/
> Modify your subscription at 
> http://www.actwin.com/mailman/listinfo.cgi/killietalk
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007 
> 2:01 PM
>
> 

Join the AKA at http://www.aka.org/aka/modules/content/index.php?id=9.
Archives are at http://fins.actwin.com/killietalk/
Modify your subscription at http://www.actwin.com/mailman/listinfo.cgi/killietalk