Re: [Killietalk] Drilling 10 gallon tanks: some are tempered glass !

[<augustand at sbcglobal_net>]

Bottom holes are put in by some people to put a stand pipe in the tanks for 
an over flow, the water  can either go to a drain and out of the system or 
go to filter bed to be recirculated. On some systems a pipe runs along the 
rack under the tanks and the pipe extends low enough for it to drain into 
this pipe with no fittings, making it easy to lift a tank off and sterilize.

One person one paper ballot
Al Anderson
6246 N Rural Street
Indianapolis IN 46229
317 253 2170
augustand at sbcglobal_net

----- Original Message ----- 
From: <BrandtEdL at aol_com>
To: <killietalk at aka_org>
Sent: Wednesday, September 07, 2005 5:16 PM
Subject: Re: [Killietalk] Drilling 10 gallon tanks: some are tempered glass 
!


> Hi All.  I'm not familiar with aquariums with holes drilled into the 
> bottom
> of them.  Is this for filtration or change of water in a tank;  etc. ? 
> Never
> dealt with it because I've always had few tanks  after the mid 70's.  Ed
> Brandt
> Join the AKA at http://aka.org/modules/tinycontent0/index.php?id=9
> Archives are at http://fins.actwin.com/killietalk/
> Modify your subscription at 
> http://www.actwin.com/mailman/listinfo.cgi/killietalk 

Join the AKA at http://aka.org/modules/tinycontent0/index.php?id=9
Archives are at http://fins.actwin.com/killietalk/
Modify your subscription at http://www.actwin.com/mailman/listinfo.cgi/killietalk