RE: [Killietalk]

["Robert Tucker" <tucker at covad_net>]

Sorry folks. That was meant to be a private aside...

-----Original Message-----
From: killietalk-bounces at aka_org [mailto:killietalk-bounces at aka_org] On
Behalf Of Robert Tucker
Sent: Tuesday, July 26, 2005 6:40 AM
To: 'killifish discussion list'
Subject: RE: [Killietalk]

Do you ever get sick of helping the helpless?

Bob Tucker

-----Original Message-----
From: killietalk-bounces+tucker=covad_net at aka.org
[mailto:killietalk-bounces+tucker=covad_net at aka.org] On Behalf Of Barry
Cooper
Sent: Tuesday, July 26, 2005 6:28 AM
To: killifish discussion list
Subject: Re: [Killietalk]

Go to the link to modify your subscription at the bottom of each 
message. You will need your password, which is sent out as a reminder at 
the beginning of each month.

Barry Cooper

Barry J. Cooper
Sweet Home, OR 97386



Jeff Quintana wrote:

>how do i get off of this list? I get far to many messages
>
>john nicholson <nicholsons_discus at yahoo_com> wrote:I use the bits from this
place
>http://www.artglass1.com/diamond-tools-drills.htm but noticed some on
>ebay that were very cheap. I drill them by hand using a cordless
>drill. It is easy to do. Remember you really don't use any force on
>the drill. Also it is the heat that cracks tanks.
>
>-john
>
>--- Barry Cooper wrote:
>
>  
>
>>Dr. Cooper,
>>
>>Could you please post this to killitalk for me as all of my emails
>>are
>>rejected by killitalk because of security settings that our Corporate
>>email
>>system places on our outbound email messages.
>>Thanks,
>>mike stoecker
>>
>>
>>A few questions for those of you who have drilled glass aquariums:
>>
>>1. Which do you find works better, brass tube [core] drills or
>>diamond tube
>>[core] drills?
>>
>>2. What are the relative advantages of each type of drill [brass vs.
>>diamond] for drilling aquariums?
>>
>>3. Did you find that the drilling machines made specifically to
>>drill glass
>>were worth the cost?
>>
>>4. In the world of glass drilling machines there a basically two
>>types of
>>lower cost drills, fixed base and swivel base. Have any of you used
>>the
>>swivel based units and if so what was your experience with it?
>>
>>5. Besides JEHMCO, [of which I am aware] can you recommend a source
>>or
>>sources for glass drilling machines?
>>
>>Thanks,
>>mike
>>
>>
>>
>>
>>Join the AKA at http://aka.org/modules/tinycontent0/index.php?id=9
>>Archives are at http://fins.actwin.com/killietalk/
>>Modify your subscription at
>>http://www.actwin.com/mailman/listinfo.cgi/killietalk
>>
>>    
>>
>
>
>John Nicholson
>Caddo Mills, TX
>
>
>
>____________________________________________________
>Start your day with Yahoo! - make it your home page 
>http://www.yahoo.com/r/hs 
>
>Join the AKA at http://aka.org/modules/tinycontent0/index.php?id=9
>Archives are at http://fins.actwin.com/killietalk/
>Modify your subscription at
http://www.actwin.com/mailman/listinfo.cgi/killietalk
>
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around 
>http://mail.yahoo.com 
>Join the AKA at http://aka.org/modules/tinycontent0/index.php?id=9
>Archives are at http://fins.actwin.com/killietalk/
>Modify your subscription at
http://www.actwin.com/mailman/listinfo.cgi/killietalk
>
>
>  
>
Join the AKA at http://aka.org/modules/tinycontent0/index.php?id=9
Archives are at http://fins.actwin.com/killietalk/
Modify your subscription at
http://www.actwin.com/mailman/listinfo.cgi/killietalk



Join the AKA at http://aka.org/modules/tinycontent0/index.php?id=9
Archives are at http://fins.actwin.com/killietalk/
Modify your subscription at
http://www.actwin.com/mailman/listinfo.cgi/killietalk



Join the AKA at http://aka.org/modules/tinycontent0/index.php?id=9
Archives are at http://fins.actwin.com/killietalk/
Modify your subscription at http://www.actwin.com/mailman/listinfo.cgi/killietalk