[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Killietalk] (no subject)

To: killietalk at aka_org
Subject: Re: [Killietalk] (no subject)
From: LeeH920226 at aol_com
Date: Wed, 4 May 2005 08:22:47 EDT
List-archive: <http://www.actwin.com/pipermail/killietalk>
List-help: <mailto:killietalk-request@aka.org?subject=help>
List-id: killifish discussion list <killietalk.aka.org>
List-post: <mailto:killietalk@aka.org>
List-subscribe: <http://www.actwin.com/mailman/listinfo/killietalk>, <mailto:killietalk-request@aka.org?subject=subscribe>
List-unsubscribe: <http://www.actwin.com/mailman/listinfo/killietalk>, <mailto:killietalk-request@aka.org?subject=unsubscribe>

In a message dated 5/4/05 1:56:42 AM, TheBiologist at charter_net writes:

<< Well, three tens in a row I have successfully broken trying to drill a 
1.5" hole with a diamond bit, with the cutting board jig and water moving over 
constantly. Everything's level, its a new diamond bit! I don't understand what 
could be the problem? I have drilled several hundred 20''s and bigger..Are tens 
so tough? I think I will just order them pre drilled! >>

I have never drilled that large a hole, but for 3/4 inch holes I have only 
had a problem when the supporting board had warped. I now use a plastic cutting 
board made into a supporting jig.

Lee Harper
Media, PA

To join the AKA see http://www.aka.org/pages/join.html
Archives are at http://fins.actwin.com/killietalk/

Prev by Date: RE: [Killietalk] (no subject)
Next by Date: RE: [Killietalk] (no subject)
Previous by thread: Re: [Killietalk] (no subject)
Next by thread: [Killietalk] (no subject)
Index(es):
- Date
- Thread