[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Killietalk] [Fwd: FW: Convert AW1B to an In-line Valve.]
I am trying to forward this message one last time, with spaces removed
from the file name, which is also shortened. Sorry for the noise.
I didn't realize we could include attachments directly with a Killie Talk
message. Therefore, I'm resending this message with the photo attached.
This way the photo will be in the archives. I apologize for the duplicate
From: killietalk-bounces+kim_kubasek=charter.net at aka.org
[mailto:killietalk-bounces+kim_kubasek=charter.net at aka.org] On Behalf Of Kim
Sent: Sunday, February 13, 2005 5:20 PM
To: killietalk at aka_org
Subject: [Killietalk] Convert AW1B to an In-line Valve.
I'm sending a link to a photo I made showing how to use a drip-system
emitter to and a JEHMCO AV1B air valve to create an in-line valve.
Convert AW1B to an In-line Valve.
1) snap off the barb of the red side.
2) drill a 1/4" hole where the barb used to be.
3) tap the hole with the thread tap.
4) screw in the AW1B valve.
Now you have a valve with hose attachments at both ends.
Barry J. Cooper
Sweet Home, OR 97386
To join the AKA see http://www.aka.org/pages/join.html
Archives are at http://fins.actwin.com/killietalk/