[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Killietalk] A Quick Linear Pump Question
My 80 watt pump has a 5/8 inch outlet. I choke it down right away to
a 1/2 in CPVC tubing and spread it around the room. Some take the
outlet to 1 inch tubing/pipe and it really works better. Really
shouldn't choke it down until it gets close to the tank valves and
tanks.
I depend on the pressure and don't use much volume. I tried a 100
watt to start with but it was way too much volume/pressure for my
system. I have three 30 's on my line but most are 5's. and 10's. and
I run the hatchers as well as a 55 gallon drum with the air pressure.
If you are in the planning stages, and are purchasing the 80 watt,
set up the plumbing around the room with 1 inch tubing and keep the
joints well sealed. The pressure will blow things apart. Choke down
the lines as close to the tanks as possible. You can stretch out the
life of the pump with less work.
Charles Harrison
Charles & Sue Harrison
http://www.InkForYourPrinter.com
Toll free 1-866-677-1900
Call, click or come in for your ink cartridge needs.
~~~~~~~~~~~~~~~~~~~~~~
At 8:43 PM -0500 1/6/05, RFeilzer at aol_com wrote:
I'm sure this has probably been covered in the past but I ask your
indulgence. I have been rebuilding my fish setup in my garage. Yes
Sexton, I finally
had to retire that old stand we hauled down from your 3rd floor apartment so
many years ago in Palos Verdes. It finally had enough termites and dryrot
that it was on the verge of collapse so out it went. I just purchased a
Linear Pump from Jemco and my question is: What is the size of the
outlet on the
pump? I purchased the 80 watt version in anticipation of a future fishroom.
Thanks for the help. Russ Feilzer here on the wet California coast.
--
To join the AKA see http://www.aka.org/pages/join.html
Archives are at http://fins.actwin.com/killietalk/