[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Killietalk] Acrylic cutting

To: "killifish discussion list" <killietalk at aka_org>
Subject: Re: [Killietalk] Acrylic cutting
From: "AL Anderson" <killiman at iquest_net>
Date: Thu, 4 Mar 2004 13:09:27 -0500
List-help: <mailto:killietalk-request@aka.org?subject=help>
List-id: killifish discussion list <killietalk.aka.org>
List-post: <mailto:killietalk@aka.org>
List-subscribe: <http://www.actwin.com/mailman/listinfo.cgi/killietalk>, <mailto:killietalk-request@aka.org?subject=subscribe>
List-unsubscribe: <http://www.actwin.com/mailman/listinfo.cgi/killietalk>, <mailto:killietalk-request@aka.org?subject=unsubscribe>
References: <21437-40476E17-2917@storefull-3196.bay.webtv.net>

My easiest set of shelves to build were some made out of 1 1/2 " X 1 1/2" X
1/4" angel iron. that were used with 2"X 10"X 60" lumber legs I just used
1/4 X 2" lag screws to hold the angle iron shelves on. I just drilled a 5/16
hole in the angel iron and 1/4' hole in the wood and screwed it together 12
years ago and its still stright with no bows.



To join the AKA see http://www.aka.org/pages/join.html
Archives are at http://fins.actwin.com/killietalk/

References:
- Re: [Killietalk] Acrylic cutting
  - From: John Wubbolt

Prev by Date: Re: [Killietalk] Acrylic cutting
Next by Date: Re: [Killietalk] Acrylic cutting
Previous by thread: Re: [Killietalk] Acrylic cutting
Next by thread: Re: [Killietalk] Acrylic cutting
Index(es):
- Date
- Thread