[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Temp mixing valves and RO units
Hello All
The ROs I work with HP water factories are all rated at 77*F. If you run
cold water through them you get about 2/3 to 1/2 of the rated product water
with the lost efficiency going down the drain. Used Temp mixing valves can
often be found in photo stores or on the web? Ebay? If your water/sewer
rates are high, even a brand new mixing valve at <$200 would pay for itself
in a year or so. Plus you can use it for doing water changes giving your
fish exactly the same temp water each time.
David
><{{{>Efficiency of RO conversion goes up dramatically with temperature and
><{{{>pressure. Running a coil of cold inlet water through a warm
><{{{>area (attic?) can
><{{{>increase the output many fold. Use it to cool a *Diapteron*
><{{{>tank, a little
><{{{>bit?
><{{{>Wright
---------------
See http://www.aka.org/AKA/subkillietalk.html to unsubscribe
Join the AKA at http://www.aka.org/AKA/Applic.htm
Follow-Ups:
References: