[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Air hose adapter

At 03:48 AM 9/22/1999 -0400, Dan Dixon asked:
>The Cornelius
>regulator I got has what appears to be a 3/8" male NTP fitting on the low
>pressure outlet (not sure about this; that's what it measures across the
>threaded nipple...it could be a 1/4" fitting). Do I adapt the metering valve
>directly to this, or should I put some air hose between the regulator and
>the needle valve?

Dan if you decide to go with air hose my web page shows the hardware
needed.  I use Cornelius regulators in my high-pressure systems.    Dave
Dave Gomberg, San Francisco            mailto:gomberg at wcf_com
For low cost CO2 systems that work:  http://www.wcf.com/co2iron 
Tropica MasterGrow in the USA:      http://www.wcf.com/tropica