[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Bending palstic tubing

What I have done in the past is to buy some spare u tubes that are parts of
the AQUACLEAR hang on filters and used these...they are clear so you can
see if there is anything stuck in them..

Also, if you have a problem with air getting in them/getting air out of
them, they have a little piece of plastic sticking up on the top which you
use to change the rate of flow of the filter, drill the centre out of this
with a small drill and then put a piece of airline tubing on it and connect
it to the venturi on a powerhead....voila!!! a self starting/bubble
removing overflow

A fisho like the rest of you!!

I can only help one person a day
Today is not your day
and tomorrows not looking too good either

Register NOW
for the 97 ANGFA Convention
DO it NOW as you will be sorry for not going
as you will be hearing stories about it for a long time after