[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
DIY seal... problem solved
I use the top part of a wash bottle on my DIY
System. The type used for squirting water for drinking.
I cut the tapered end off and was able to connect a
piece of standard size aquarium hose to that end.
The other end that goes inside the bottle has
a long tube that must be cut also(about 1" from the
top). If you get the right wash bottle you will
be able to screw the cap on to a normal sized
soda bottle with no problem. No glueing,
no Heat gun and no mess, any questions feel free
to e-mail me.